Интерфейсный модуль Juniper MPC3E-3D-NG

SKU
MPC3E-3D-NG
5 875 000,00 KZT
EAN: 11380
GPL price:
72100 $
Состояние: Новое
Наличие: В наличии на складе
Срок поставки: 5-7 дней
MPC3E-3D-NG with port based queuing and flexible queuing option, includes full scale L2/L2.5 and reduced scale L3 features, Optics s old separately. Req. JUNOS 14.1RX for Junos Contunuity based deployment. Supported with 15.1R1

 

Model

Information

GPL Price

MPC3E-3D-NG-IR-B

NG MPC3E, PORT QUEUE, FULL SCALE, 16 VPN

92 500 $

MPC3E-3D-NG-Q

NEXT-GEN MPC3E, RICH QUEUE, MX

110 000 $

MPC3E-3D-NG-Q-IR-B

NG MPC3E, RICH QUEUE, FULL SCALE, 16 VPN

135 000 $

MPC3E-3D-NG-Q-R-B

NEXT-GEN MPC3E, RICH QUEUE, FULL SCALE,

175 000 $

MPC3E-3D-NG-R-B

NEXT-GEN MPC3E, PORT QUEUE, FULL SCALE,

105 000 $

 

Интерфейсные платы или линейные карты Juniper Networks (line card, interface module)  позволяют расширить маршрутизатор или коммутатор (модульную платформу, шасси) требуемым функционалом, включая нужные порты доступа на скоростях 1GbE, 10GbE, 40GbE или 100GbE, платы контроля (switch control board) и пр.

Интерфейсные платы Juniper представлены различными модулями, которые совместимы с той или иной серией (напр. интерфейсный модуль MS-MIC-16G совместим со всей линейкой Juniper MX, а модуль MPC-3D-16XGE-SFPP совместим с серией MX240, MX480 и MX960).

Интерфейсная плата MIC (Modular Interface Cards) представляет собой модуль небольшого размера, который обеспечивает физическое подключение к различным типам сетевых устройств. MIC плата может поддерживать различные физические интерфейсы в одном модуле. Модуля Juniper MICs также поддерживают режим горячей замены и подключения. Например, в маршрутизаторах MX серии, интерфейсный модуль MIC устанавливается в модуль MPC (Modular Port Concentrator), а в сериях от MX5 до MX104 модуля MPC уже являются встроенными в шасси.

Интерфейсный модуль Juniper MPC (Modular Port Concentrator) обеспечивает сервисы пересылки пакетов. Модуль MPC инкапсулирует пакеты и передает их через исходящие интерфейсы модуля MIC. Каждый MPC модуль оснащен до четырех наборов микросхем Junos Trio, который выполняет функции управления. Например, маршрутизатор Juniper MX960 поддерживает установку до 12 модулей MPCs, а платформа MX480 до 3 MPCs. Для правильной работы модуля Juniper MPC нужно использовать высокопроизводительные модуля охлаждения. На сайте Juniper http://www.juniper.net есть калькулятор просчета рекомендуемой мощности питания и охлаждения, для определенной серии и используемых MPC модулей.   

Интерфейсные модуля DPC (Dense Port Concentrators) обеспечивает несколько физических интерфейсов и систем пересылки пакетов на одной плате, которая устанавливается в слот маршрутизатора или модульного шасси. Модуль DPC принимает входящие пакеты и отправляет исходящие пакеты в сеть.

Модуля Juniper PIC (Physical Interface Card) устанавливаются в FPC (Flexible PIC Concentrators), аналогично тому, как работают MIC и MPC модули. PICs модуля обеспечивают физические интерфейсы, а FPCs платы обеспечивают пересылку пакетов в сети. Каждый FPC модуль оснащен микросхемой ASIC, которая выполняет функции управления, и FPC поддерживает установку 2-х модулей PIC.

Технические характеристики интерфейсного модуля Juniper MPC3E-3D-NG:

MPC3E-3D-NG

MPC3E-3D-NG with port based queuing and flexible queuing option, includes full scale L2/L2.5 and reduced scale L3 features, Optics s old separately. Req. JUNOS 14.1RX for Junos Contunuity based deployment. Supported with 15.1R1

MPC3E-3D-NG-IR-B

MPC3E-3D-NG Bundle with port based queuing and flexible queuing option, incl. full scale L2/L2.5, L3 features and up to 16  L3VPN in stances per MPC, Optics sold sep. Req. JUNOS 14.1RX for Junos Contunuity. Supported with 15.1R1.

MPC3E-3D-NG-Q

MPC3E-3D-NG-Q with full scale HQoS, Price includes full scale L2/L2.5 and reduced scale L3 features, Optics sold separately. Require s JUNOS 14.1RX for Junos Contunuity based deployment. Supported with 15.1R1 as a First R1 release.

MPC3E-3D-NG-Q-IR-B

MPC3E-3D-NG-Q Bundle with full scale HQoS, includes full scale L2/L2.5, L3 features and up to 16 L3VPN instances per MPC, Optics sol d separately. Requires JUNOS 14.1RX for Junos Contunuity based deployment. Supported with 15.1R1

MPC3E-3D-NG-Q-R-B

MPC3E-3D-NG-Q Bundle with full scale HQoS, Bundle includes full scale L2/L2.5, L3 and L3VPN features, Optics sold separately. Next-G en MPC3E, Rich Queue, Full Scale.

MPC3E-3D-NG-R-B

MPC3E-3D-NG Bundle with port based queuing and flexible queuing option, includes full scale L2/L2.5, L3 and L3VPN features, Optics s old separately. Requires JUNOS 14.1RX for Junos Contunuity based deployment. Supported with 15.1R1 

Software release

  • Junos OS releases 14.1R4, 14.2R3 and Junos Continuity, Junos OS release 15.1 and later.
  • Refer to MIC/MPC Compatibility for information about which MICs are supported on this MPC.
  • Refer to the JTAC Knowledgebase article https://kb.juniper.net/KB21476 for recommended software releases.

Description

  • 80 Gbps capacity without hierarchical quality of service (HQoS)
  • Requires high-capacity fan trays and high-capacity filter trays
  • Weight: 15.96 lb (7.26 kg)
  • Model numbers: MPC2E-3D-NG
  • Name in the CLI: MPC2E NG PQ & Flex Q
  • Add-on license provides limited additional flexible queuing.

Note: MPC2E-3D-NG is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface.

Note: To power on an MPC on MX240, MX480, and MX960 routers, you must configure the network-services enhanced-ip or network-services enhanced-ethernet statement. With this configuration, the router functions in Enhanced-IP/Enhanced-Ethernet network servicesmode and powers on MPCs and MS-DPCs only. The MPC does not come online if this statement  is not configured. On MX2010, and MX2020 routers, network-services enhanced-ip is configured by default.

Hardware features

  • Line-rate throughput of up to 80 Gbps
  • Supports WAN-PHY mode at 9.95 Gbps and LAN-PHY mode at 10.31 Gbps
  • Two slots for MICs
  • Junos Trio chipsets for increased scaling for bandwidth, subscribers, and services.

Note: MPC2E-3D-NG is not compatible with SCB, you must use either SCBE-MX or SCBE2-MX for the switch fabric interface.

Note: MPC2E-3D-NG does not support MIC3-3D-10XGE-SFPP, MIC3-3D-1X100GE-CFP, MIC3-3D-1X100GE-CXP, and MIC3-3D-2X40GE-QSFPP.

Note: The non-HQOS MPC3E NG and MPC2E NG MPCs support MIC-3D-8CHOC3-4CHOC12 and MIC-3D-4CHOC3-2CHOC12 only with a limited queuing license.

Software features

  • Chained composite next hops
  • Layer 3 VPN localization
  • Detection of Layer 2 loops
  • Entropy label support in mixed mode
  • SNMP and CLI support for Routing Engine memory monitoring
  • Mixed-mode LAG support on core interfaces
  • Dynamic power management for MICs
  • Support for flexible-queuing
  • See Protocols and Applications Supported by the MX240, MX480, MX960, MX2010, and MX2020 MPC3E for information about the protocols and applications that this MPC supports.

Power requirement

Maximum with highest-power MICs at 55° C: 9.88 A @ 48 V (474 W)

At different temperatures:

  • 55° C: 474 W
  • 40° C: 417 W
  • 25° C: 400  W

LEDs

OK/FAIL LED, one bicolor:

  • Steady green—MPC is functioning normally.
  • Blinking green—MPC is transitioning online or offline.
  • Red—MPC has failed.
Ваша оценка