Коммутатор Fortinet FSR-112D-POE

FSR-112D-POE

Ethernet Interface

8x GE RJ45 (including 8x PoE/PoE+ capable ports), 4x GE SFP slots

PoE is 802.3 af

PoE+ is 802.3at

Console Interface

DB9 connector

Operating Mode

Store and forward, L2/L3 wire-speed/non-blocking switching engine

MAC Addresses

8K

Switching Capacity

24 Gbps

Packets Per Second

46 Mpps

VLANs Supported

4K

DRAM

512 MB

FLASH

64 MB

Speed

10/100/1000 Mbps

MDI/MDIX Auto-crossover

Support straight or cross wired cables

Auto-negotiating

10/100/1000 Mbps speed auto-negotiation; Full and half duplex

PoE+ (PSE)

IEEE 802.3at, up to 30 W per RJ45 GE port (up to 8 PoE+ ports)

Port Types Supported

Gigabit fiber multimode, fiber single mode, fiber long-haul single mode 1000Base(SX/LX/ZX)

Fiber Port Connector

LC typically for fiber (depends on module)

Power Input

Redundant input terminals

Input Voltage Range

44–57V DC (for PoE model), 12–57 V (non-PoE model), 44–49V input voltage can support PoE (802.3af) on all ports, 50–57V input voltage can support PoE+ (802.3at) on all ports.

Switch Power

With 8x PoE+ sources, the switch itself draws 10.4 W

Heat Dissipation

The switch dissipates 69.6 BTU/h with 8x PoE+ devices attached

Power Status Indication

Indication of power input status

PoE Indication

PoE port status

Ethernet Port Indication

Link and speed

Operating Temperature Range

-40–167°F (-40–75°C) cold startup at -40°C/°F)

Storage Temperature Range

-40–185°F (-40–85°C)

Humidity

5–95% RH non-condensing

MTBF

> 30 years

Cooling

Fanless

Ingress Protection

IP30

Installation Option

DIN-Rail mounting, wall mounting

Length x Width x Height

3.8 x 4.15 x 6.06 inches (96.4 x 105.5 x 154 mm)

Weight

2.7 lbs (1230 g)