Коммутатор Huawei S7712 (ES0B017712P0)
Коммутаторы Huawei S7700 серии наделены возможностями мультисервисной маршрутизации и коммутации от 10GE до 100GE, масштабируемости для крупных кампусных сетей; обновления плат для программно-определяемой сети (SDN) и для предоставления плат контроля радиочастотного доступа (АС) для беспроводной связи.
Модульная конструкция, унифицированное управление пользователями и комплексные функции безопасности делают коммутаторы S7700 идеальными решениями для малых и крупных сетей. Конструкция супервиртуальной архитектуры (SVF 2.0) и кластера CSS предоставляют масштабируемость и достаточную пропускную способность для приложений видеосвязи и видеонаблюдения.
Технические характеристики коммутатора Huawei S7712 (ES0B017712P0):
Item |
S7712 |
Switching Capacity |
3.84 Tbit/s |
Forwarding Performance |
2,880 Mpps |
Service Slots |
12 |
Dimensions (W x D x H) |
442 mm x 489 mm x 664 mm, 15U |
Chassis Weight (empty) |
37 kg |
Maximum Power Consumption of the Entire Equipment |
4,200W |
Maximum PoE Power |
8,800W |
Redundancy Design |
Supervisors, power modules, CMUs, fans trays |
Wireless Network Management |
Native AC |
AP access control, AP region management, and AP profile management |
|
Radio profile management, uniform static configuration, and centralized dynamic management |
|
Basic WLAN services, QoS, security, and user management |
|
Deployment of ACs on different network layers |
|
User Management |
Unified user management |
802.1x, MAC address, and Portal authentication |
|
Traffic- and time-based accounting |
|
User authorization based on user groups, domains, and time ranges |
|
VLAN |
4K VLANs |
Access, trunk, and hybrid interface types, auto-negotiation of LNP links |
|
Default VLAN |
|
VLAN switching |
|
QinQ and selective QinQ |
|
MAC address-based VLAN assignment |
|
VxLAN |
VxLAN |
Configured through NETCONF protocol |
|
ARP |
256K ARP entries |
MAC Address |
1M MAC address entries |
MAC address learning and aging |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
Limit on the number of MAC addresses learned on ports and VLANs |
|
Ring Protection |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
SEP |
|
BPDU protection, root protection, and loop protection |
|
BPDU tunnel |
|
ERPS (G.8032) |
|
IP Routing |
1M IPv4 routing entries |
IPv4 routing protocols, such as RIP v1/v2, OSPF, BGP, and IS-IS |
|
IPv6 dynamic routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ |
|
Multicast |
128,000 multicast routing entries |
IGMP v1/v2/v3 and IGMP v1/v2/v3 snooping |
|
PIM-DM, PIM-SM, and PIM-SSM |
|
MSDP and MBGP |
|
Fast leave |
|
Multicast traffic control |
|
Multicast querier |
|
Multicast packet suppression |
|
Multicast CAC |
|
Multicast ACL |
|
MPLS |
Basic MPLS functions |
MPLS OAM |
|
MPLS-TE |
|
MPLS VPN/VLL/VPLS |
|
CSS Switch Fabric Clustering |
CSS Switch Fabric Clustering (S7706 and S7712) |
Service Port Clustering |
Service Port Clustering (S7706 and S7712) |
Reliability |
LACP and E-Trunk between devices |
VRRP and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/static route |
|
NSF and GR for BGP/IS-IS/OSPF/LDP |
|
TE FRR and IP FRR |
|
HSR |
|
Ethernet OAM (IEEE 802.3ah and 802.1ag) |
|
ITU-Y.1731 |
|
DLDP |
|
QoS |
256K ACLs |
Traffic classification based on Layer 2 protocol packet header, Layer 3 protocol information, Layer 4 protocol information, and 802.1p priority |
|
ACL, CAR, re-marking, and scheduling |
|
Queue scheduling algorithms including PQ, WRR, DRR, PQ + WRR, and PQ + DRR |
|
Congestion avoidance mechanisms, such as WRED and tail drop |
|
HQoS |
|
Traffic shaping |
|
Configuration and Maintenance |
Zero-Touch Provisioning |
Console and SSH terminals |
|
Network management protocols, such as SNMP v1/v2c/v3 |
|
File uploading and downloading using FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
Hot patches |
|
User operation logs |
|
Security and Management |
802.1x authentication and portal authentication |
MACSec |
|
NAC |
|
RADIUS and HWTACACS authentication |
|
Different user levels for commands, preventing unauthorized users from using certain commands |
|
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks |
|
Ping and traceroute |
|
RMON |
|
Service Chain |
|
Time synchronization |
IEEE 1588v2 |
SyncE |
|
Value-added Service* |
Firewall |
NAT |
|
NetStream |
|
IPSec |
|
Load balancing |
|
IPS |
|
Interoperability |
Supports VBST (compatible with PVST/PVST+/RPVST) |
Supports LNP (similar to DTP) |
|
Supports VCMP (similar to VTP) |
|
Energy Conservation |
IEEE 802.3az: Energy Efficient Ethernet (EEE) |
Working Voltage |
DC: –38.4V to –72V AC: 90V to 290V |