Коммутатор Huawei S9712 (EH1BS9712E00)
Высокопроизводительные терабитные коммутаторы Huawei S9700 серии предназначены для агрегирования услуг в центрах данных следующего поколения и использования в качестве коммутаторов опорной сети в крупных кампусных сетях. Для обновления до полностью программируемого гибкого коммутатора используется плата X1E Huawei.
Коммутаторы S9700 предоставляют коммутацию уровня 2-3 и различные сетевые услуги, такие как MPLS VPN, аппаратный IPv6, облачной рабочий стол, видеоконференцсвязь и беспроводная связь. Стабильная переадресация, аппаратная OAM/BFD, кольцевая защита сети и обновление ПО без прерывания услуг повышают доступность системы и сокращают общую стоимость владения (TCO).
Технические характеристики коммутатора Huawei S9712 (EH1BS9712E00):
Item |
S9712 |
Switching Capacity |
8.64 Tbit/s; 18.56 Tbit/s |
Packet Forwarding Rates |
3,840 Mpps/6,480 Mpps |
Service Slots |
12 |
Dimensions (H x W x D) |
663.95 mm x 442 mm x 489 mm, 15U |
Chassis Weight (empty) |
37 kg |
Equipment Power Supply Capability |
6,600W |
Wireless Network Management |
Native AC |
AP access control, AP region management, and AP profile management |
|
Radio profile management, uniform static configuration, and centralized dynamic management |
|
Basic WLAN services, QoS, security, and user management |
|
User Management |
Unified user management |
802.1x, MAC address, and Portal authentication |
|
Traffic- and time-based accounting |
|
User authorization based on user groups, domains, and time ranges |
|
iPCA Quality Awareness |
Marking real service packets to obtain real-time count of dropped packets and packet loss ratio |
Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks |
|
SVF Virtualization |
Virtualizing Access Switches (ASs) and APs into one logical device to simplify management and maintenance |
Two layers of ASs allowed in an SVF system |
|
Third-party devices allowed between SVF parent and clients |
|
VLAN |
Access, trunk, and hybrid interfaces supported |
Default VLAN |
|
VLAN switching |
|
QinQ and selective QinQ |
|
MAC address-based VLAN assignment |
|
MAC Address |
Automatic learning and aging of MAC addresses |
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
STP/ERPS |
STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) |
BPDU protection, root protection, and loop protection |
|
BPDU tunnel |
|
ERPS (G.8032) |
|
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 dynamic routing protocols, such as RIPng, OSPFv3, ISISv6, and BGP4+ |
|
Multicast |
IGMP v1/v2/v3, IGMP v1/v2/v3 snooping |
PIM-SM, PIM-DM, PIM-SSM |
|
MSDP, MBGP |
|
Fast leave |
|
Multicast traffic control |
|
Multicast querier |
|
Multicast protocol packet suppression |
|
Multicast CAC |
|
Multicast ACL |
|
MPLS |
MPLS functions |
MPLS OAM |
|
MPLS TE |
|
Supports MPLS VPN/VLL/VPLS |
|
Reliability |
LACP and E-Trunk |
VRRP and BFD for VRRP |
|
BFD for BGP/IS-IS/OSPF/static route |
|
NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP |
|
TE FRR and IP FRR |
|
Ethernet OAM (IEEE 802.3ah and 802.1ag) (hardware-based) |
|
HSR |
|
ITU-Y.1731 |
|
DLDP |
|
QoS |
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-mark, and schedule |
|
Queue scheduling algorithms, such as SP, WRR, DRR, SP + WRR, and SP + DRR |
|
Congestion avoidance mechanisms, such as WRED and tail drop |
|
H-QoS |
|
Traffic shaping |
|
Network Synchronization |
Ethernet synchronization |
1588v2 |
|
Configuration and Maintenance |
Console, Telnet, and SSH login |
Network management protocols, such as SNMP v1/v2/v3 |
|
File uploading and downloading using FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
Hot patches |
|
User operation logs |
|
Security and Management |
802.1x authentication and portal authentication |
MACsec |
|
NAC |
|
RADIUS and HWTACACS authentication for login users |
|
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
Defense against DoS attacks, TCP SYN Flood attacks, UDP Flood attacks, broadcast storms, and heavy traffic attacks |
|
1K CPU queues |
|
Ping and traceroute functions based on ICMP packets |
|
Supports remote network monitoring |
|
Value-added Services |
Firewall |
NAT |
|
NetStream |
|
IPSec |
|
Load balancing |
|
Wireless AC |
|
IPS |
|
Interoperability |
Interoperable with VBST (compatible with PVST/PVST+/RPVST) |
Interoperable with LNP (similar to DTP) |
|
Interoperable with VCMP (similar to VTP) |
|
Energy Saving |
Supports IEEE 802.3az: Energy Efficient Ethernet (EEE) |
Operating Voltage |
DC: –40V to –72V |