Коммутатор Ruckus ICX7150 (ICX7150-48ZP-E2X10G)
Коммутаторы Ruckus серии ICX7150 - это коммутаторы корпоративного класса, предназначены для предприятий малого и среднего уровня, небольших офисов, филиалов, распределенных кампусов и рекомендуются вендором для внедрения вместе с беспроводными продуктами Ruckus.
Самая младшая модель Ruckus ICX 7150-C12P является коммутатором компакт класса, на всех 12 портах портах поддерживается PoE/PoE+ с PoE-бюджетов в 124 Вт. Коммутатор оснащен Uplink интерфейсами 2x10/100/1000 и 2x1/10GbE SFP/SFP+(Uplink/Stacking). Данный коммутатор поддерживает все функциональные возможности старших моделей (стекирование и L3).
Старшие модели Ruckus ICX 7150 имеют 24 или 48 портов. Все модели оснащены оптическими портами 4x10Gb, которые можно использовать как для аплинк подключений, так и для стекирования.
Серия ICX 7150 предназначена чтобы постепенно заменить ICX 6450 / 6430 и в отличии от своих предшественников обладает более современным аппаратным и программным обеспечением.
Характеристики коммутатора Ruckus ICX7150 (ICX7150-48ZP-E2X10G):
|
Included Accessories |
Rubber feet |
|
Cables Included |
1 x console cable |
|
Rack Mounting Kit |
Included |
|
MTBF |
104,626 hours |
|
Compliant Standards |
Plug and Play, EN 61000-3-2, EN50081-1, ICES-003, EN 61000-3-3, EN 61000-6-1, EN 61000-4-4, EN 61000-4-2, EN 61000-4-3, EN 61000-4-6, EN 61000-4-5, EN 61000-4-11, EN 61000-4-8, UL 60950-1 Second Edition, WEEE, RoHS, EN 61000-6-3, FCC Part 15 A, CAN/CSA C22.2 No. 60950-1-07, EN 60825-2, IEC 60950-1 Second Edition, VCCI Class A, EN 60950-1:2006, IEC 68-2-6, AS/NZS 55022, IEC 68-2-36, EN 55022/CISPR 22 Class A, IEC 68-2-32 |
|
Localization |
United States |
|
Width |
17.3 in |
|
Depth |
13.1 in |
|
Height |
1.7 in |
|
Weight |
14.57 lbs |
|
Min Operating Temperature |
23 °F |
|
Max Operating Temperature |
113 °F |
|
Humidity Range Operating |
5 - 95% (non-condensing) |
|
Min Storage Temperature |
-13 °F |
|
Max Storage Temperature |
158 °F |
|
Humidity Range Storage |
0 - 95% (non-condensing) |
|
Device Type |
Switch - 48 ports - managed - stackable |
|
Enclosure Type |
Rack-mountable 1U |
|
Subtype |
2.5 Gigabit Ethernet |
|
Ports |
16 x 100/1000/2.5G (PoH) + 32 x 10/100/1000 (PoE+) + 6 x Gigabit SFP (uplink) + 2 x 10 Gigabit SFP+ (uplink / stacking) |
|
Power Over Ethernet (PoE) |
PoH / PoE+ |
|
Processor |
1 |
|
PoE Budget |
740 W |
|
Performance |
Switching capacity (full duplex): 304 Gbps ¦ Forwarding performance (full duplex): 226 Mbps ¦ Aggregate stacking bandwidth: 480 Gbps |
|
Capacity |
Switches in a stack: 12 ¦ MAC addresses: 16384 ¦ VLANs supported: 4095 ¦ PVLANs supported: 32 ¦ STP instances: 254 ¦ ARP entries: 4094 ¦ IPv6 routes: 1000 ¦ IPv4 routes: 1000 ¦ Next hop address: 4094 ¦ Trunk groups: 128 ¦ Ports per trunk group: 16 ¦ Jumbo frame size: 9216 ¦ QoS priority queues per port: 8 ¦ Layer 2 multicast groups: 3072 ¦ Layer 3 multicast groups: 2048 ¦ Port Extenders (PE) per fabric: 36 ¦ Port Extender (PE) cascade depth (units): up to 6 |
|
Jumbo Frame Support |
Yes |
|
Routing Protocol |
RIP, RIP-1, RIP-2, IGMPv2, IGMP, static IP routing, IGMPv3, ECMP |
|
Remote Management Protocol |
SNMP 1, RMON 1, RMON 2, RMON 3, RMON 9, Telnet, SNMP 3, SNMP 2c, HTTP, HTTPS, TFTP, SSH, SSH-2, CLI, NTP |
|
Encryption Algorithm |
AES |
|
Authentication Method |
Secure Shell (SSH), RADIUS, TACACS, TACACS+, Secure Shell v.2 (SSH2) |
|
Features |
Flow control, layer 2 switching, auto-sensing per device, power over Ethernet (PoE), BOOTP support, trunking, VLAN support, auto-uplink (auto MDI/MDI-X), IGMP snooping, Syslog support, traffic shaping, port mirroring, DiffServ support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, IPv6 support, High Availability, firmware upgradable, SNTP support, DDos attack prevention, Metro Ring Protocol (MRP) support, sFlow, Per-VLAN Spanning Tree (PVST), PIM-SM snooping, Remote Fault Notification (RFN), IP Precedence, SSH support, Jumbo Frames support, MLD snooping, PoE+, Trusted Platform Module (TPM), front to back airflow, Per-VLAN Spanning Tree Plus (PVST+), Equal-Cost Multipath (ECMP), Uni-Directional Link Detection (UDLD), IPv4 support, hot swappable dual fans, LLDP support, Link Aggregation Control Protocol (LACP), Management Information Base (MIB), MAC address lockout, Dynamic VLAN Support (GVRP), Class of Service (CoS), Strict Priority (SP), Generic Attribute Registration Protocol (GARP), IGMP proxy, redundant fans, GARP VLAN Registration Protocol (GVRP), Type of Service (ToS), DiffServ Code Point (DSCP) support, hot swappable power supply, OpenFlow support, Extended Fabric, power over HDBaseT (PoH), rate limit, AES encryption, MAC address learning, MAC address authentication, Authentication, Authorization and Accounting (AAA), Static Link Aggregation, VLAN Double Tagging (Q-in-Q), Root Guard, VLAN mirroring, Private VLAN, IGMP fast leave, STP BPDU Guard, MAC based VLAN, loopback detection, Hybrid OpenFlow 1.3, VLAN Tagging, MAC address mapping |
|
Compliant Standards |
IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3af, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1ab (LLDP), IEEE 802.3at, IEEE 802.1AX, IEEE 802.1BR, IEEE 802.3bz |
|
RAM |
1 GB |
|
Flash Memory |
2 GB |
|
Status Indicators |
Power, status |
|
Interfaces |
16 x 100/1000/2.5G RJ-45 PoH - 15.4 W ¦ 32 x 10/100/1000 Base-T RJ-45 PoE+ ¦ 6 x Gigabit LAN SFP ¦ 2 x 10Gbit LAN SFP+ ¦ 1 x management (LAN) RJ-45 ¦ 1 x console (USB) Type C management ¦ 1 x serial (console) RJ-45 management ¦ 1 x USB Type A |
|
Power Device |
Internal power supply - hot-plug |
|
Installed Qty |
1 (installed) / 2 (max) |
|
Power Redundancy |
Optional |
|
Power Redundancy Scheme |
1+1 (with optional power supply) |
|
Power Provided |
920 Watt |
|
Voltage Required |
AC 120/230 V (50/60 Hz) |