Маршрутизатор Cisco C1117-4PMWE
SKU
C1117-4PMWE
755 785,80 KZT
EAN:
10068
GPL price:
1881 $
Состояние:
Новое
Наличие:
Доступен под заказ
Срок поставки:
25-35 дней
ISR 1100 4P DSL Annex M w/ LTE Adv SMS/GPS 802.11ac -E WiFi
Категория: ISR1000
Контакты
12 месяцев гарантии
На все оборудование
Безналичный расчет
с НДС и без НДС
Маршрутизаторы Cisco 1100 серии с программным обеспечением Cisco IOS XE служат обеспечение объедения WAN, комплексной безопасности, проводного и беспроводного доступа в одну, высокопроизводительную платформу.
Cisco 1100 серия отлично подходит для развертывания на малых и средних предприятиях.
Технические характеристики маршрутизатор Cisco C1117-4PMWE:
|
Model |
WAN |
Wi-Fi |
LAN switch |
Integrated |
|||||
|
GE |
GE/SFP |
ADSL2/VDSL2+ |
LTE Advanced |
802.11ac |
GE |
PoE |
PoE+ |
||
|
C1117-4PMWE |
- |
1 |
1 ADSL2/VDSL2+ |
– |
2X2 MIMO |
4 |
2 |
1 |
Yes |
|
Feature |
Specification |
|
|
Memory (default and maximum) |
DRAM: 4 GB |
Flash: 4 GB |
|
Console |
● Micro USB console (USB 3.0).
|
|
|
Mini-USB port (reserved) |
● Micro-USB port to support remote LTE diagnostics and monitoring tools (Qualcomm CAIT and Spirent UDM) (USB 3.0).
|
|
|
WLAN interfaces |
● Multiuser Multiple-Input Multiple-Output (MU-MIMO) allows transmission of data to multiple 802.11ac Wave 2–capable clients simultaneously to improve the client experience. Prior to MU-MIMO, 802.11n and 802.11ac Wave 1 access points could transmit data to only one client at a time, typically referred to as Single-User MIMO (SU‑MIMO).
● 802.11ac Wave 2 with 2x2:2 MIMO technology uses two spatial streams when operating in SU-MIMO or MU-MIMO mode, offering 867-Mbps rates for more capacity and reliability than competing access points.
● Flexible deployment through the Mobility Express solution is ideal for small to medium-sized deployments. Easy setup allows the 1100 Series to be deployed on networks without a physical controller.
|
|
|
Maximum clients |
● Maximum number of associated wireless clients: 200 per Wi-Fi radio; in total 400 clients per access point.
● Flexible deployment through theMobility Express solution is ideal for small to medium-sized deployments. Easy setup allows the 1815i to be deployed on networks without a physical controller.
|
|
|
Authentication and security |
● AES for Wi-Fi Protected Access 2 (WPA2).
● 802.1X, RADIUS AAA.
● 802.11r.
● 802.11i.
|
|
|
802.11ac |
● 2x2 SU-MIMO/MU-MIMO with two spatial streams.
● Maximal Ratio Combining (MRC).
● 20-, 40-, and 80-MHz channels.
● PHY data rates up to 866.7 Mbps (80 MHz on 5 GHz).
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Rx).
● 802.11 Dynamic Frequency Selection (DFS).
● Cyclic Shift Diversity (CSD) support.
|
|
|
Software |
● Cisco Unified Wireless Network Software with AireOS Wireless Controllers Release 8.5 MR1 or later.
|
|
|
DSL interfaces |
● Dying gasp.
● ITU G.993.2 (VDSL2) and supported profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a.
● VDSL2 Vectoring.
● ADSL Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+).
● ADSL Annex M G.992.3 (ADSL2) and G.992.5 (ADSL2+).
|
|
|
Inline PoE |
● Optional internal adapter for inline PoE on 4 switch ports for IP phones or external wireless access points; 802.3af-compliant PoE or 802.3at-compliant PoE+.
|
|
|
External power supply |
Product power specifications: ● AC input voltage: Universal 100 to 240 VAC.
● Frequency: 50 to 60 Hz.
● Maximum output power: 66W (default).
● Output voltages: 12 VDC.
● Optional PoE and PoE+:
◦ Single 125W power supply required for Cisco 1100-8P router
◦ Single 115W power supply required for Cisco 1100-4P router
● External output voltage: 48 VDC.
|
|
|
USB 3.0 |
● USB devices supported:
◦ USB eTokens
◦ USB flash memory
● Note: Devices USB 3.0 supports to be connected externally.
|
|
|
LEDs |
● WWAN (green/amber).
● SIM status (green/amber).
● Received Signal Strength Indication (RSSI) bar (green).
● 3G/LTE service (green/amber).
● GPS (green/amber).
● Speed and link for Gigabit Ethernet WAN port (green).
● Speed and link for all Fast Ethernet LAN ports (green).
|
|
|
Physical dimensions (H x W x D) |
● 1.75 x 12.7 x 9.6 in. (44 x 323 x 244 mm) (includes rubber feet on LTE models).
● 1.75 x 12.7 x 9.03 in. (42 x 323 x 230mm) (includes rubber feet on non-LTE models).
|
|
|
Weight |
● 5.7 lb (2.59 kg).
|
|
|
Standard safety certifications |
● UL 60950-1, 2nd edition.
● CAN/CSA C22.2 No. 60950-1, 2nd edition.
● EN 60950-1, 2nd edition.
● CB to IEC 60950-1, 2nd edition with all group differences and national deviations.
|
|
|
EMC emissions |
● EN55022/CISPR22, CFR 47 Part 15, ICES003, VCCI-V-3, AS/NZS CISPR22, CNS13438, EN300-386, EN61000-3-2, EN61000-3-3, and EN61000-6-1.
|
|
|
EMC immunity |
● EN55024/CISPR24, (EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-11), and EN300-386.
|
|
|
Radio immunity |
● EN301 489-1, EN 301 489-7, and EN301 489-24.
|
|
|
Cellular radio |
● EN 301 908-1, EN 301 908-2, EN 301 511, 47 CFR Part 22, 47 CFR Part 24, and EN 301 908-13.
|
|
|
Environmental operating range |
● Nonoperating temperature: -4° to 149°F (-0° to 65°C).
● Nonoperating humidity: 5% to 95% relative humidity (noncondensing).
● Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m).
● Operating temperature: 32° to 104°F (0° to 40°C).
● Operating humidity: 10% to 85% relative humidity (noncondensing).
● Operating altitude: 0 to 10,000 ft (0 to 3000 m).
|
|