Точка доступа Aruba (HPE) JW247A
HPE Aruba Instant IAP-228 (RW) FIPS/TAA - Radio access point
Прочные 228 беспроводных точек доступа в помещении обеспечивают гигабитную производительность Wi-Fi для мобильных устройств 802.11ac в суровых условиях внутри помещений, таких как склады и стадионы.
Его уникальный промышленный дизайн поддерживает более широкий диапазон температур для сред, в которых отсутствует нагрев и охлаждение. 228 также имеет шесть разъемов RP-SMA для внешних антенн с высоким коэффициентом усиления в больших общественных местах.
С максимальной скоростью передачи данных 1,3 Гбит / с в диапазоне 5 ГГц и 600 Мбит / с в диапазоне 2,4 ГГц 228 работает в три раза быстрее точек доступа 802.11n и обеспечивает производительность, аналогичную проводному соединению. Кроме того, для повышения простоты и безопасности сети динамическая сегментация автоматически применяет политики доступа на уровне устройств в реальном времени в проводных и беспроводных сетях Арубы.
Технические характеристики точки доступа Aruba (HPE) JW247A:
AP-228 SPECIFICATIONS |
· 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3x3 MIMO and three combined, diplexed external antenna connectors. |
WIRELESS RADIO SPECIFICATIONS |
· AP type: Indoor, dual radio, 5 GHz 802.11ac and 2.4 GHz 802.11n · In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate. · Software-configurable dual radio supports 5 GHz and 2.4 GHz · 3x3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate · Supported frequency bands (country-specific restrictions apply): · 2.4000 GHz to 2.4835 GHz · 5.150 to 5.250 GHz · 5.250 to 5.350 GHz · 5.470 to 5.725 GHz · 5.725 to 5.850 GHz · Available channels: Dependent on configured regulatory domain · Dynamic frequency selection (DFS) optimizes the use of available RF spectrum · Supported radio technologies: · 802.11b: Direct-sequence spread-spectrum (DSSS) · 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) · 802.11n/ac: 3x3 MIMO with up to three spatial streams · Supported modulation types: · 802.11b: BPSK, QPSK, CCK · 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM · 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM · Transmit power: Configurable in increments of 0.5 dBm · Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): · 2.4-GHz band: +28 dBm (23 dBm per chain) · 5-GHz band: +28 dBm (23 dBm per chain) · Advanced Cellular Coexistence (ACC) feature to effectively deal with interference from cellular systems · Maximum ratio combining (MRC) for improved receiver performance · Cyclic delay diversity (CDD) for improved downlink RF performance · Short guard interval for 20-MHz, 40-MHz and 80-MHz channels · Space-time block coding (STBC) for increased range and improved reception · Low-density parity check (LDPC) for high-efficiency error correction and increased throughput · Transmit beam-forming (TxBF) for increased reliability in signal delivery · Supported data rates (Mbps): · 802.11b: 1, 2, 5.5, 11 · 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 · 802.11n: 6.5 to 450 (MCS0 to MCS23) · 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, NSS = 1 to 3) · 802.11n high-throughput (HT) support: HT 20/40 · 802.11ac very high throughput (VHT) support: VHT 20/40/80 · 802.11n/ac packet aggregation: A-MPDU, A-MSDU |
POWER |
· Worst-case power consumption from the AP: 23W · Power sources sold separately · Power over Ethernet (PoE+): 802.3at-compliant |
OTHER INTERFACES |
· Two 10/100/1000BASE-T Ethernet network interfaces (RJ-45) · Auto-sensing link speed and MDI/MDX · Load balancing support to achieve platform throughput greater than 1 Gbps · PoE-PD: 802.3at PoE+ · Serial console interface (Micro USB) |
MOUNTING |
· Optional mounting kits · AP-220-MNT-W1 is directly compatible · 270 Series outdoor AP mounts (AP-270-MNT-V1, AP-270-MNT-V2, AP-270-MNT-H1, AP-270-MNT-H2) are compatible when the AP-270-MNT-ADP adapter is utilized |
MECHANICAL |
· Dimensions/weight (unit, excluding mount accessories): · 222 mm (L) x 150 mm (W) x 75 mm (H), 8.5” (L) x 6” (W) x 2.5” (H) · 1.225 kg/2.700 lbs |
ENVIRONMENTAL |
· Operating: · Temperature: -40° C to +60° C (-40° F to +140° F) · Humidity: 5% to 95% non-condensing · Storage and transportation: · Temperature: -40° C to +70° C (-40° F to +158° F) · Operating Altitude: 3,000 m |
ANTENNAS |
· Six RP-SMA connectors for external antennas |
REGULATORY |
· FCC/Industry of Canada · CE Marked · R&TTE Directive 1995/5/EC · Low Voltage Directive 72/23/EEC · EN 300 328 · EN 301 489 · EN 301 893 · UL/IEC/EN 60950 · EN 60601-1-1 and EN 60601-1-2 · For more country-specific regulatory information and approvals, please see your Aruba representative. |
REGULATORY MODEL NUMBERS |
· AP-228 and IAP-228: APIN0228 |
CERTIFICATIONS |
· CB Scheme Safety, cTUVus · UL2043 plenum rating · Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac |
WARRANTY |
· Aruba limited lifetime warranty |
MINIMUM SOFTWARE VERSION |
· ArubaOS 6.4.3.0 · Aruba Instant 4.2.0 |