Точка доступа Aruba (HPE) JW262A

ACCESS POINT MODELS

· AP-275 and IAP-275

· 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three integrated omni-directional antennas

· AP-274 and IAP-274

· 2.4-GHz (600 Mbps max) and 5-GHz (1.3 Gbps max) radios, each with 3×3 MIMO and three external antenna connectors

· AP-277 and IAP-277

· 2.4-GHz and 5-GHz radios, each with 3x3 MIMO and three integrated 80° H x 80° V beamwidth directional antennas

WIRELESS RADIO SPECIFICATIONS

· AP type: Outdoor, dual radio, 5-GHz 802.11ac and 2.4-GHz 802.11n

· In addition to 802.11n data rates, the 2.4-GHz radio supports 802.11ac data rates using 256-QAM modulation. This gives TurboQAM-enabled clients a 33% boost above the maximum supported data rate to deliver up to 600 Mbps.

· 3×3 MIMO with three spatial streams and up to 1.3 Gbps wireless data rate

· Supported frequency bands (country-specific restrictions apply):

· 2.4000 GHz to 2.4835 GHz

· 5.150 GHz to 5.250 GHz

· 5.250 GHz to 5.350 GHz

· 5.470 GHz to 5.725 GHz

· 5.725 GHz to 5.875 GHz

· Available channels: Dependent upon configured regulatory domain

· Dynamic frequency selection (DFS) optimizes the use of available RF spectrum

· Supported radio technologies:

· 802.11b: Direct-sequence spread-spectrum (DSSS)

· 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)

· 802.11n/ac: 3×3 MIMO with up to three spatial streams

· Supported modulation types:

· 802.11b: BPSK, QPSK, CCK

· 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (with TurboQAM clients)

· 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

· Transmit power: Configurable in increments of 0.5 dBm

· Maximum (aggregate, conducted total) transmit power (limited) by local regulatory requirements):

· 2.4-GHz band: +28 dBm (23 dBm per chain)

· 5-GHz bands: +28 dBm (23 dBm per chain)

· Advanced cellular coexistence (ACC) feature to minimize interference from cellular systems

· Maximum ratio combining (MRC) for improved receiver performance

· Cyclic delay diversity (CDD) for improved downlink RF performance

· Short guard interval for 20-MHz, 40-MHz and 80-MHz channels

· Space-time block coding (STBC) for increased range and improved reception

· Low-density parity check (LDPC) for high-efficiency error correction and increased throughput

· Explicit transmit beam-forming (TxBF) for increased reliability in signal delivery

· Supported data rates (Mbps):

· 802.11b: 1, 2, 5.5, 11

· 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54

· 802.11n: 6.5 to 450 (MCS0 to MCS23, 1 to 3 spatial streams)

· 802.11ac: 6.5 to 1,300 (MCS0 to MCS9, 1 to 3 spatial streams

· 802.11n high-throughput (HT) support: HT 20/40

· 802.11ac very high throughput (VHT) support: VHT 20/40/80

· 802.11n/ac packet aggregation: A-MPDU, A-MSDU Power

· Maximum power consumption: 23 watts.

· Direct AC source: 100-240 Volt AC

· Power over Ethernet (PoE): 48 Vdc (nominal) 802.3at compliant source

ANTENNAS

· AP-274:

· Six N-type female connectors for external antennas.

· AP-275:

· Six integrated omni-directional antennas for 3×3 MIMO with maximum antenna gain of 5 dBi in 2.4 GHz and 5 dBi in 5 GHz. Built-in antennas are optimized for horizontal mounted orientation of AP-275.

· AP-277:

· Six integrated multipolarized directional antennas with 80° H x 80° V beamwidths for 3 x 3 MIMO with maximum antenna gain of 6.5 dBi in 2.4 GHz and 5GHz.

REGULATORY MODEL NUMBERS

· AP-274 and IAP-274: APEX0101

· AP-275 and IAP-275: APEX0100

· AP-277 and IAP-277: APEX0102

MOUNTING

· Must be ordered separately

· Optional mounting kits:

· AP-270-MNT-V1: Aruba 270 series AP long mount kit for pole/wall mounting. Reduces impact of obstruction by pole or extends away from corner.

· AP-270-MNT-V2: Aruba 270 series AP short mount kit for pole/wall mounting

· AP-270-MNT-H1: Aruba 270 series AP mount kit for hanging from inclined/horizontal structures

· AP-270-MNT-H2: Low profile mount primarily for AP-277

ENVIRONMENTAL

· Operating:

· Temperature: -40° C to +65° C (-40° F to +150°F)

· Humidity: 5% to 95% non-condensing

· Storage and transportation

· Temperature: -40° C to +70° C (-40° F to +158°F)

· Maximum operating altitude: 3000m

· Chassis rating: IP66 and IP67

· Wind survivability: Up to 165 mph

· Shock and vibration: ETSI 300-19-2-4 spec T41.E 4M3

OTHER INTERFACES

· One PoE+ PD port 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

· Auto-sensing link speed and MDI/MDX

· One port 10/100/1000BASE-T Ethernet network interfaces (RJ-45)

· Auto-sensing link speed and MDI/MDX

· AC power interface, power cords sold separately

· Serial console interface (micro USB)

· Reset button

· Visual indicator (LED):

· Power/system status; automatically disabled after initial operation period

MECHANICAL

· AP-274

· Dimensions/weight (excluding mount):

· 23 cm (W) x 24 cm (D) x 19 cm (H) with aesthetic cover

· 9.0” (W) x 9.4” (D) x 7.5” (H)

· 2.7 kg/6 lbs

· 23 cm (W) x 24 cm (D) x 14 cm (H) without aesthetic cover

· 9.0” (W) x 9.4” (D) x 5.5” (H)

· 2.4 kg/5.3 lbs

· AP-275

· Dimensions/weight (excluding mount):

· 23 cm (W) x 24 cm (D) x 27 cm (H)

· 9.0” (W) x 9.4” (D) x 10.6” (H)

· 2.4 kg/5.3 lbs

· AP-277

· Dimensions/weight (excluding mount):

· 23 cm (W) x 22 cm (D) x 13 cm (H)

· 9.0" (W) x 8.7" (D) x 5.1" (H)

· 2.1 kg/4.6 lbs

REGULATORY

· FCC/Industry of Canada

· CE Marked

· R&TTE Directive 1999/5/EC

· Low Voltage Directive 2006/95/EC

· EN 300 328

· EN 301 489

· EN 301 893

· UL/IEC/EN 60950

· EN 60601-1-1, EN60601-1-2

· For more country-specific regulatory information and approvals, please see your Aruba representative.

CERTIFICATIONS

· CB Scheme Safety, cTUVus

· Wi-Fi Alliance certified 802.11a/b/g/n/ac

MINIMUM SOFTWARE VERSIONS

· ArubaOS 6.4 (AP-274, AP-275)

· Aruba OS 6.4.3 (AP-277)

· Aruba Instant 4.1 (AP-274, AP-275)

· Aruba Instant 4.2.0 (AP-277)