Точка доступа Cisco CW9166I-E

Item

Specification

Part numbers

Cisco Catalyst 9166 Access Points

• CW9166I-x: Cisco Catalyst 9166 Series

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. 

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List.

Software

Catalyst 9166

• Cisco IOS® XE Software Release 17.9.1 or later

Supported wireless LAN controllers

• Cisco Catalyst 9800 Series Wireless Controllers (physical or virtual)

802.11n version 2.0 (and related) capabilities

• 4x4 MIMO with four spatial streams
• Maximal Ratio Combining (MRC)
• 802.11n and 802.11a/g
• 20- and 40-MHz channels
• PHY data rates up to 1.5 Gbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
• Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
• 802.11 Dynamic Frequency Selection (DFS)
• Cyclic Shift Diversity (CSD) support

802.11ac

• 4x4 downlink MU-MIMO with four spatial streams
• MRC
• 802.11ac beamforming
• 20-, 40-, 80-, and 160-MHz channels
• PHY data rates up to 3.4 Gbps (Dual 4x4 80+80 MHz on 5-GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• Cyclic Shift Diversity (CSD) support
• Wi-Fi Protected Access (WPA) 3 support

802.11ax

• 1024 QAM
• 4x4 uplink/downlink MU-MIMO with four spatial streams (2.4 GHz, 5 GHz and 6 GHz)
• Uplink/downlink OFDMA
• TWT
• BSS coloring
• MRC
• 802.11ax beamforming
• 20-, 40-, 80-, and 160-MHz channels (6-GHz)
• 20-, 40-, 80-, and 80+80-MHz channels (5-GHz)
• 20-MHz channels (2.4-GHz)
• PHY data rates up to 7.78 Gbps (4x4 160 MHz on 6 GHz, 4x4 80 MHz on 5 GHz, and 4x4 20 MHz on 2.4 GHz)
• Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
• 802.11 DFS
• CSD support
• WPA3 support

Integrated antenna

• 2.4 GHz: Peak gain 3 dBi, internal antenna, omnidirectional in azimuth
• 5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
• 5 GHz (XOR): Peak gain 5 dBi, internal antenna, omnidirectional in azimuth
• 6-GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth

Interfaces

• Catalyst 9166 Series: 1x 100M/1000M/2.5G/5G Multigigabit Ethernet (RJ-45)
• Management console port (RJ-45)
• USB 2.0 at 4.5W

Indicators

• Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions (W x L x H)

• Access point (without mounting brackets): 9.5 x 9.5 x 2.2 in. (241.3 x 241.3 x 56.9 mm)

Weight

• Catalyst 9166: 3.54 lb. (1.60 kg)

Input power requirements

• 802.3bt Cisco Universal PoE (Cisco UPOE®), 802.3at Power over Ethernet Plus (PoE+)
• Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6
• 802.3af PoE (only for configuration staging, all radios off)
• DC power input (54V)

Input power requirements

• 802.3bt Cisco Universal PoE (Cisco UPOE®), 802.3at Power over Ethernet Plus (PoE+)
• Cisco power injectors: AIR-PWRINJ7=, AIR-PWRINJ6=, MA-INJ-6
• 802.3af PoE (only for configuration staging, all radios off)
• DC power input (54V)

Environmental

Catalyst 9166

• Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
• Nonoperating (storage) altitude test: 25˚C, 15,000 ft. (4600 m)
• Operating temperature: 32° to 122°F (0° to 50°C)
• Operating humidity: 10% to 90% (noncondensing)
• Operating altitude test: 40˚C, 9843 ft. (3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled.

System memory

• 2048 MB DRAM
• 1024 MB flash

Available transmit power settings (Max/Min)

• 2.4 GHz
• 23 dBm (200 mW)
• -4 dBm (0.39 mW)
• 5 GHz
• 26 dBm (400 mW)
• -1 dBm (0.79 mW)
• 6 GHz
• 23 dBm (200 mW)
• -4 dBm (0.39 mW)
• Note: In countries where use of the 6 GHz band is not allowed or there is no current software support, the 6 GHz radio will be disabled. The radio may be enabled with future software, once the product is certified to operate in 6 GHz for that country.

Certifications

• Wi-Fi Alliance: Wi-Fi 6 (R2), Wi-Fi 6E, WPA3-R3, WPA3-Suite B, Enhanced Open Security
• Bluetooth SIG: Bluetooth Low Energy

Regulatory domains

Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Warranty

Limited lifetime hardware warranty

Compliance

• Safety:
• IEC 60950-1
• EN 60950-1
• UL 60950-1
• CAN/CSA-C22.2 No. 60950-1
• AS/NZS60950.1
• UL 2043
• Class III equipment
• Emissions:
• CISPR 32 (rev. 2015)
• EN 55032 (rev. 2012/AC:2013)
• EN 55032 (rev. 2015)
• EN61000-3-2 (rev. 2014)
• EN61000-3-3 (rev. 2013)
• KN61000-3-2
• KN61000-3-3
• AS/NZS CISPR 32 Class B (rev. 2015)
• 47 CFR FCC Part 15B
• ICES-003 (rev. 2016 Issue 6, Class B)
• VCCI-CISPR 32
• CNS (rev. 13438)
• KN-32
• Immunity:
• CISPR 24 (rev. 2010)
• EN 55024 + AMD 1 (rev. 2010)
• EN 55035: 2017
• KN35
• Emissions and immunity:
• EN 301 489-1 (v2.1.1 2017-02)
• EN 301 489-17 (v3.1.1 2017-02)
• QCVN (18:2014)
• QCVN 112:2017/BTTTT
• KN 489-1
• KN 489-17
• EN 60601-1-2:2015
• EN 61000-6-1: 2007

• Radio:
• EN 300 328 (v2.1.1)
• EN 301 893 (v2.1.1)
• AS/NZS 4268 (rev. 2017)
• 47 CFR FCC Part 15C, 15.247, 15.407
• RSP-100
• RSS-GEN
• RSS-247
• China regulations SRRC
• LP0002 (rev 2018.1.10)
• Japan Std. 33a, Std. 66, and Std. 71
• RF safety:
• EN 50385 (rev. Aug 2002)
• ARPANSA
• AS/NZS 2772 (rev. 2016)
• EN 62209-1 (rev. 2016)
• EN 62209-2 (rev. 2010)
• 47 CFR Part 1.1310 and 2.1091
• RSS-102
• IEEE standards:
• IEEE 802.3
• IEEE 802.3ab
• IEEE 802.3af/at
• IEEE 802.11a/b/g/n/ac/ax
• IEEE 802.11h, 802.11d
• Security:
• 802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3
• 802.1X
• Advanced Encryption Standard (AES)
• Extensible Authentication Protocol (EAP) types:
• EAP-Transport Layer Security (TLS)
• EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
• Protected EAP (PEAP) v0 or EAP-MSCHAP v2
• EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
• PEAP v1 or EAP-Generic Token Card (GTC)
• EAP-Subscriber Identity Module (SIM)