Точка доступа Fortinet FAP-421E
Технические характеристики точки доступа Fortinet FAP-421E:
FORTIAP 421E |
|
Hardware Type |
Indoor AP |
Number of Radios |
2 |
Number of Antennas |
8 Internal |
Antenna Type and Peak Gain |
PIFA: 4 dBi for 2.4 GHz, |
Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850 |
Radio 1 Capabilities |
2.4 GHz b/g/n (4x4:4 stream) 20/40 MHz (256 QAM) |
Radio 2 Capabilities |
5 GHz a/n/ac (4x4:4 stream) 20/40/80 MHz (256 QAM) |
Maximum Data Rate |
Radio 1: up to 800 Mbps Radio 2: up to 1,733 Mbps |
Interfaces |
2x 10/100/1000 Base-T RJ45, 1x Type A USB, 1x RS-232 RJ45 Serial Port |
Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at (2x2 operation with 802.3af) |
Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled) |
EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST |
User/Device Authentication |
WPA™ and WPA2™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist |
Maximum Tx Power |
2.4 GHz: 24 dBm / 251 mW (4 chains combined), 5 GHz: 25 dBm / 316 mW (4 chains combined) |
Kensington Lock |
Yes |
IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, |
SSID Types Supported |
Local-Bridge, Tunnel, Mesh |
Per Radio Client Capacity |
Up to 512 |
Cellular Co-existence |
No |
LED Off Mode |
Yes |
802.11ac MU-MIMO Wave 2 |
Yes |
Transmit Beam Forming (TxBF) |
Yes |
Low-Density Parity Check (LDPC) Encoding |
Yes |
Maximum Likelihood Demodulation (MLD) |
Yes |
Maximum Ratio Combining (MRC) |
Yes |
A-MPDU and A-MSDU |
Yes |
MIMO Power Save |
Yes |
Short Guard Interval |
Yes |
Rogue Scan Radio Modes |
Background, Full-time |
WIPS / WIDS Radio Modes |
Background, Full-time |
Packet Sniffer Mode |
Yes |
Spectrum Analyzer |
Yes |
Length x Width x Height |
8.5 x 8.5 x 2.2 inches, (215 x 215 x 56 mm) |
Weight |
3.53 lbs (1.6 kg) |
Package (shipping) Weight |
4.95 lbs (2.2 kg) |
Power Supply |
SP-FAP400-PA-XX, GPI-115, or GPI-130 |
Power Consumption (Max.) |
23 W max power draw in 802.3at mode and 12.95 W max power draw when in 802.3af power mode (operates in 2x2 mode) |
Humidity |
5–90% non-condensing |